Filter
Top Products
Chapter 3 Configuring Devices
Using the Templates
3-86
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Step 2 Complete the following:
Note You must enter the exact syntax for the setting to work properly.
Step 3 Click Add to add the custom value to the list.
Note If the custom value you enter is the same as an existing one in the
Template Menu, the custom value will override the value in the menu.
Step 4 To remove a custom value, select it from the list, then click Remove.
Step 5 Select one of the following in the left pane:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-89.)
• Finish to save the template. (See Finishing the Template, page 3-89.)
• Another template category to configure more options. (See Template
Categories, page 3-2.)
Examples
Following are examples of custom key values that can be entered:
• Set system contact on access points.
Field Description
Key
Enter a valid MIB key. (See Examples,
page 3-86.)
Value
Enter a valid MIB value. (See Examples,
page 3-86.)