Filter
Top Products
3-13
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 3 Configuring Devices
Using the Templates
Step 2 Click Add. The new name is added to the Ethertype Filters list.
Step 3 Select one of the following:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-89.)
• Finish to save the template. (See Finishing the Template, page 3-89.)
• Another template category to configure more options. (See Template
Categories, page 3-2.)
Set Name Enter a descriptive filter set name.
See Naming Guidelines, page A-1.
Default Disposition From the list, select one of the following:
• Forward—Use this setting to forward protocol
traffic.
• Block—Use this setting to block protocol traffic.
Default Time to Live (msec)
unicast Enter the number of milliseconds unicast packets
should stay in the access point’s buffer before they are
discarded.
multicast Enter the number of milliseconds multicast packets
should stay in the access point’s buffer before they are
discarded.
Table 3-3 Creating New Ethertype Filters Settings (continued)
Field Description