Filter
Top Products
CHAPTER
2-1
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
2
Fault Monitoring
The Faults tab displays information to help you monitor your devices. All the
device information shown under this tab is polled from the devices in your
network.
Following are the subtabs under Faults:
Note Some of the subtabs may not be visible to some users.
• Display Faults—See Displaying Faults, page 2-1
• Specify Fault Thresholds—See Specifying Fault Thresholds, page 2-7
• Specify Policies—See Specifying Policies, page 2-13
• Fault Forwarding—See Forwarding Faults, page 2-15
Displaying Faults
This window displays device fault information. A fault is an abnormal condition
that occurs when a system component exceeds a performance threshold or is not
functioning properly. (See Specifying Fault Thresholds, page 2-7 to set threshold
levels.)
A fault can also occur when a system policy is violated. (See Specifying Policies,
page 2-13 to set policies.)