Filter
Top Products
5-11
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 5 Performing Administrative Tasks
Using Discovery and Managing Devices
• Select the State Date and Start Time from the pulldown lists.
• To repeat discovery at specified intervals, click Enable. Then enter a number
and select the interval from the Every list.
Step 7 Click Next. The CDP Discovery - Summary dialog box appears.
Step 8 Click Finish to submit your settings or Back to make changes in your settings.
Run Discovery Now
This option allows you to run an immediate one-time discovery.
Note Your login determines whether you can use this option.
Procedure
Step 1 Select Administration > Discover > Discover > Run Discovery Now. The
Discovery - Seeds dialog box appears.
Step 2 If necessary, add seed devices:
Note If you add seed devices in the Discovery - Seeds dialog box, they will
not be saved. Any seed devices added here are used for this one-time
discovery only.
a. Enter the seed device’s IP address in the Add Seed Value text box and
click >>.
b. Set the CDP distance by selecting a number from the list.
Step 3 Click Run Now. The Discovery - Summary dialog box appears.
• Click Back if you want to make changes.
• Click Finish to run the discovery. The discovery will begin within 2 minutes.