Filter
Top Products
Chapter 3 Configuring Devices
Using the Templates
3-38
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Setting Up Radio Filters
Note Changing this setting may cause the access point to reboot.
Procedure
Step 1 Select Radio > Filters. The Radio Filters dialog box displays in the right pane.
Step 2 Complete the following:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Table 3-9 Radio Filters Settings
Field Description
Ethertype
Receive Enter the ID of a defined Ethertype filter, or
select one of the filters you created using
Association > Ethertype Filters.
Transmit Enter the ID of a defined Ethertype filter, or
select one of the filters you created using
Association > Ethertype Filters.
IP Protocol
Receive Enter the ID of a defined IP protocol filter, or
select one of the filters you created using
Association > IP Protocol Filters.
Transmit Enter the ID of a defined IP protocol filter, or
select one of the filters you created using
Association > IP Protocol Filters.