Filter
Top Products
Chapter 2 Fault Monitoring
Specifying Policies
2-14
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Step 4 Click Add to add the SSID to the list, then go to Step 9.
Step 5 To remove an SSID from the list, select it, click Remove, then go to Step 9.
Step 6 Complete the following:
Step 7 Go to Step 9.
Severity From the list, select a severity level to associate
with this policy.
Enter ssid Enter the unique identifier used by client
devices to associate with the access point. Any
alphanumeric character up to 32 characters
long.
Field Description
Verify Check if you want to verify one of the
following:
• Broadcast SSID is disabled
• WEP is enabled
• LEAP is enabled
• HTTP is disabled
• Telnet is disabled
• User Manager Capabilities are enforced
• HTTP authentication
Polling Interval From the list, select the polling interval.
Severity From the list, select a severity level to associate
with this policy.
Field Description