Filter
Top Products
Chapter 3 Configuring Devices
Using the Templates
3-22
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Creating New Port Filters
Procedure
Step 1 To create and enable port filters, enter the following:
Step 2 Click Add. The new name is added to the Current Port Filters list.
Step 3 Select one of the following in the left pane:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-89.)
• Finish to save the template. (See Finishing the Template, page 3-89.)
• Another template category to configure more options. (See Template
Categories, page 3-2.)
Field Description
Add New Protocol Filter
Set ID Enter an identification number for the filter set.
Set Name Enter a descriptive filter set name.
See Naming Guidelines, page A-1.
Default Disposition From the list, select one of the following:
• Forward—Use this setting to forward traffic.
• Block—Use this setting to block traffic.
Default Time to Live (msec)
unicast Enter the number of milliseconds unicast packets
should stay in the access point’s buffer before they
are discarded.
multicast Enter the number of milliseconds multicast packets
should stay in the access point’s buffer before they
are discarded.