Filter
Top Products
3-73
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 3 Configuring Devices
Using the Templates
Configuring SNMP Settings
Use this option to configure settings for notifications to be sent to an SNMP
server.
Procedure
Step 1 Select Services > SNMP. The Services: SNMP dialog box appears.
Step 2 Complete the following:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Step 3 Select one of the following in the left pane:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-89.)
• Finish to save the template. (See Finishing the Template, page 3-89.)
• Another template category to configure more options. (See Template
Categories, page 3-2.)
Field Description
Simple Network Management
Protocol (SNMP)
From the list, select one of the following:
• Enable—Use this setting to allow event
notifications to be sent to an SNMP
server.
• Disable—Use this setting to not allow
event notifications to be sent to an
SNMP server.
SNMP Trap Destination Enter the IP address or the host name of the
server running the SNMP Management
software.
SNMP Trap Community Enter the SNMP community name.