Filter
Top Products
Chapter 3 Configuring Devices
Using the Templates
3-70
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Step 3 Select one of the following in the left pane:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-89.)
• Finish to save the template. (See Finishing the Template, page 3-89.)
• Another template category to configure more options. (See Template
Categories, page 3-2.)
Configuring FTP Settings
Use this option to configure File Transfer Protocol settings for the access point.
All non-browser file transfers are governed by these settings.
Procedure
Step 1 Select Services > FTP. The Services: FTP dialog box appears.
Step 2 Complete the following:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Domain Name Servers Enter the IP addresses of up to three domain
name servers on your network.
Domain Suffix Enter the portion of the full domain name
that you would like omitted from access
point displays.
For example, the full name of a computer
might be “mycomputer.mycompany.com.”If
you set the domain suffix to
“mycompany.com,” the computer’s name
would be displayed as “mycomputer.”
Table 3-16 Services > DNS Settings (continued)
Field Description