Filter
Top Products
3-33
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Chapter 3 Configuring Devices
Using the Templates
Procedure
Step 1 Select Ethernet > Filters. The Ethernet: Filters dialog box displays in the right
pane.
Step 2 Complete the following:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Step 3 Select one of the following in the left pane:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-89.)
• Finish to save the template. (See Finishing the Template, page 3-89.)
Field Description
Ethertype
Receive Enter the ID of a defined Ethertype filter, or select one of the
filters you created using Association > Ethertype Filters.
Transmit Enter the ID of a defined Ethertype filter, or select one of the
filters you created using Association > Ethertype Filters.
IP Protocol
Receive Enter the ID of a defined IP protocol filter, or select one of
the filters you created using Association > IP Protocol
Filters.
Transmit Enter the ID of a defined IP protocol filter, or select one of
the filters you created using Association > IP Protocol
Filters.
IP Port
Receive Enter the ID of a defined IP port filter, or select one of the
filters you created using Association > IP Port Filters.
Transmit Enter the ID of a defined IP port filter, or select one of the
filters you created using Association > IP Port Filters.