Filter
Top Products
Chapter 3 Configuring Devices
Using the Templates
3-74
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Configuring SNTP Settings
Use this option to configure time server settings.
Procedure
Step 1 Select Services > SNTP. The Services: SNTP dialog box appears.
Step 2 Complete the following:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Field Description
Simple Network Time Protocol
(SNTP)
From the list, select one of the following:
• Enable—Use this setting if your network
uses Simple Network Time Protocol.
• Disable—Use this setting if your
network does not use Simple Network
Time Protocol.
Default Time Server Enter enter the server’s IP address.
GMT Offset (hr) From the list, select the time zone in which
the access point operates.
Use Daylight Savings Time From the list, select one of the following:
• Enable—Use this setting to have the
access point automatically adjust to
Daylight Savings Time.
• Disable—Use this setting to not have the
access point automatically adjust to
Daylight Savings Time.