Filter
Top Products
@ Plate return spring
@
Washer
(J)
Snap ring
@ Plate return spring
@
Washer
(J)
Circlip
WATER PUMP
(c::?7
-14)
GEARSHIFT SYSTEM
GEARSHIFT SHAFT/GEARSHIFT ARM DISASSEMBLY
• Remove the following parts from the gearshift shaft/gearshift
arm.
CD
Washer
(2)
Snap ring
@ Gearshift shaft return spring
@ Gearshift cam drive plate
GEARSHIFT SHAFT/GEARSHIFT ARM INSPECTION
• Inspect the gearshift shaft/gearshift arm for
wear
or bend.
• Inspect the return springs for damage or fatigue.
• Replace the arm or spring if there is anything unusual.
GEARSHIFT SHAFT/GEARSHIFT ARM REASSEMBLY
• Install the following parts to the gearshift shaft/gearshift arm
as shown in the right illustration.
CD
Washer
(2)
Circlip
@ Gearshift shaft return spring
@ Gearshift cam drive plate
ENGINE
3·45
NOTE:
When installing the gearshift shaft return spring, position the
stopper
® of the gearshift arm between the shaft return spring
ends®.