Filter
Top Products
8·74
CHASSIS
DRIVE CHAIN
Use the special tool in the following procedures, to cut and rejoin
the drive chain.
,ggt!
09922-22711: Drive chain cutting and joining tool set
NOTE:
When using the special tool,
apply
a small quantity
of
grease to
the threaded parts
of
the special tool.
DRIVE CHAIN CUTTING
• Set up the special tool as shown in the illustration.
CD
Tool body
ell
Grip handle
® Pressure bolt "A"
@ Pressure bolt "B"
@ Bar
@ Adjuster bolt (with through hole)
({) Pin remover
@ Chain holder (engraved mark 500)
with reamer bolt M5 x 10
NOTE:
The tip
of
pin remover ({) should be positioned inside approxi-
mately
5 mm (0.2 in) from the
end
face
of
pressure
bolt
'~"®
as
shown in the illustration.
5 mm (0.2 in)