Filter
Top Products
• Turn the crankshaft to bring the "Top" line on the starter clutch
to the index mark and also to bring the notches
® on the left
ends of both camshafts (Ex and In) to the positions as shown.
• In this condition, read the valve clearance at the valves
® (In
and Ex of No.4 cylinder, Ex of No.3 and
In of No.2).
• If the clearance is out of specification, adjust the clearance.
(L7"2-10)
ITuh
09900-20803: Thickness gauge
• Turn the crankshaft 360 degrees (one rotation) to bring the
"TOP" line on the starter clutch to the index mark of valve tim-
ing inspection hole and also to bring the notches
® to the
position as shown.
• Read the clearance at the remaining valves
© and adjust the
clearance if necessary.
(L7"2-10)
Cam position
Notch
® position
Exhaust Camshaft Intake Camshaft
®
f-Front
@
--Front @
©
f-Front
@
--Front @
PERIODIC
MAINTENANCE
2·9
®
Front
<¢:::l
Front
<¢:::l