Filter
Top Products
3·36
ENGINE
VALVE GUIDE SERVICING
• Using the valve guide remover, drive the valve guide out
toward the intake or exhaust camshaft side.
,rootl
09916-53310: Valve guide remover/installer
NOTE:
* Discard the removed valve guide subassemblies.
* Only oversized valve guides are available as replacement
parts. (Part No. 11115-11070)
• Re-finish the valve guide holes in cylinder head with the
reamer and handle.
lrUt!
09916-49030: Valve guide reamer
09916-34542: Reamer handle
I
CAUTION
I
When refinishing or removing the reamer from the
valve guide hole, always turn it clockwise.
• Apply engine oil to the valve guide hole.
• Drive the valve guide into the hole using the valve guide
installer
CD
and attachment
~.
,-fciOti
09916-53310: Valve guide installer/remover
CD
09916-53321: Attachment
~
NOTE:
Install the valve guide until the attachment contacts with the cyl-
inder
head@.
I
CAUTION
I
Failure to oil the valve guide hole before driving the
new guide into place may result in a damaged guide or
head.
• After installing the valve guides, re-finish their guiding bores
using the reamer.
• Clean and oil the guides after reaming.
'riOtI
09916-33310: Valve guide reamer
09916-34542: Valve guide reamer handle
NOTE:
Insert the reamer from the combustion chamber
and
always turn
the reamer handle clockwise.