Filter
Top Products
8-2
CHASSIS
EXTERIOR PARTS
FASTENER REMOVAL AND REINSTALLATION
FASTENER
Removal
• Depress the head of fastener center piece
CD.
• Pull out the fastener @.
Installation
• Let the center piece stick out toward the head so that the
pawls
(2)
close.
• Insert the fastener into the installation hole.
NOTE:
To prevent the pawl
(2)
from damage, insert the fastener all the
way into the installation hole.
• Push in the head of center piece until it becomes flush with
the fastener outside face.
FASTENER
Removal
• Pull the head of fastener center piece
• Pull out the fastener
@.
Installation
• Let the center piece stick out toward the head so that the
pawls close.
• Insert the fastener into the installation hole.
• Push in the head of center piece.