Filter
Top Products
8·18
CHASSIS
REASSEMBLY AND REMOUNTING
Reassemble and remount the front fork in the reverse order of
removal and disassembly. Pay attention to the following points:
OIL SEAL AND DUST SEAL
• Install the dust seal, oil seal stopper ring, oil seal and oil seal
retainer onto the inner tube.
CD
Dust seal
11)
Oil seal stopper ring
@ Oil seal
@ Oil seal retainer
I
CAUTION
I
* When installing the oil seal to outer tube, be careful
not to damage the oil seal lip.
* Do not use solvents for washing to prevent oil seal
damage.
* Apply fork oil to the Anti-friction metals and lip of the
oil seal.
* Make sure that the oil seal stopper ring has been fit-
ted securely.
• Insert the inner tube into the outer tube and fit the oil seal and
dust seal with the special tool.
iKiOh
09940-52861: Front fork oil seal installer
NOTE:
Stamped
mark
on the oil seal should face outside.
DAMPER ROD BOLT
• Insert the inner rod/damper rod (cartridge) into the inner tube.
• Apply THREAD LOCK to the damper rod bolt and tighten it to
the specified torque with the special tool.
~
99000-32050: THREAD LOCK
"1342"
(USA)
~
99000-32110: THREAD LOCK SUPER
"1322"
(Others)