Filter
Top Products
GENERATOR COVER
• Remove the generator cover.
GENERATOR ROTOR
• Hold the generator rotor with the special tool.
Irut.
09930-44520:
Rotor
holder
• Remove the generator rotor bolt.
• Install a bolt ® of suitable size to the left end of crankshaft.
SUITABLE
BOLT
® [M12,
length:
28 - 38
mm]
• Remove the generator rotor with the special tool.
IrThit.
09930-34980:
Rotor
remover
WATER PUMP
• Disconnect the clamp
CD.
• Remove the water hose
(2)
and inlet cover @.
• Remove the water pump @.
WATER PUMP SERVICING (c::::T7-11)
ENGINE
3·23
28-38
mm