Filter
Top Products
EMISSION
CONTROL
INFORMATION
11·9
EVAPORATIVE EMISSION
CONTROL
SYSTEM INSPECTION
~
(Only for E-33)
• Remove the seat and frame cover. (c:::J"a-6)
• Lift and support the fuel tank with its prop stay.
(c:::J"S-S)
HOSES
Inspect the hoses for wear or damage.
Make sure that the hoses are securely connected.
EVAP CANISTER
Inspect the canister for damage to the body.
TANK PRESSURE CONTROL VALVE
Inspect the tank pressure contorol valve body for damage.
Inspect the tank pressure control valve operation in the following
procedure.
• Remove the tank pressure control valve.
• When air pressure is applied to the tank pressure control
valve from the side
®, air should flow out through the purge
control valve.
• When air pressure is applied to the tank pressure control
valve from the side
@, air should not flow through the purge
valve.
• If the tank pressure control valve operates otherwise, it must
be replaced.
A WARNING
Gasoline and gasoline vapor is toxic. A small amount
of fuel remains in the tank pressure control valve
when checking it.
Do not swallow the fuel when blowing the tank pres-
sure control valve.
Air
¢
NOTE:
......
../
When connecting the tank pressure control valve to the hose,
the side @ should face toward the fuel shut-off valve side,
and
the side ® should face toward the canister side.
@ ®