Filter
Top Products
• Separate the front fork cap bolt from the front fork.
• Compress the front fork spring with the special tool
® and
insert the special tool
@ between the lock-nut and the spacer.
jrUh
09940-94930: Front fork spacer holder ®
09940-94922: Stopper plate @
• Remove the front fork cap bolt from the inner rod by loosening
the lock nut.
• Compress the fork spring with the special tool and remove the
special tool.
• Remove the spacer
@, spring retainer @, spring (J), adjuster
rod
@ and front fork cap ®.
I
CAUTION
I
* Do not disassemble the front fork cap ®.
* Do not have a outer tube after removing the front
fork cap bolt from the front fork.
• Invert the front fork and stroke the inner rod several times to
let out fork oil.
• Under the inverted condition of front fork, drain oil completely
by holding the fork for a while.
• Remove the damper rod bolt with the special tool.
jgh 09940-30221: Front fork assembling tool
CHASSIS
8·15