Filter
Top Products
INSTALLATION
• Tighten the engine coolant temperature sensor to the speci-
fied torque.
(!J
Engine
coolant
temperature
sensor:
18 N·m
(1.8 kgf-m, 13.0 Ib-ft)
I
CAUTION
I
Take
special
care
when
handling
the
temperature
sen-
sor.
It
may
cause
damage
if
it
gets
a
sharp
impact.
• Install the fuel tank.
(L7'5-5)
• Install the front seat.
THERMOSTAT
REMOVAL
• Remove the front seat.
(L7'8-6)
• Lift and support the fuel tank.
(L7'5-5)
• Place a rag under the thermostat cover.
• Remove the thermostat cover.
• Remove the thermostat
CD.
COOLING
AND
LUBRICATION
SYSTEM
7·9