Filter
Top Products
3·88
ENGINE
• Install the starter clutch assembly onto the crankshaft.
NOTE:
When install the starter clutch assembly, fit the concave
part
®
of
the starter clutch onto the convex
part
@
of
the crankshaft.
• Install the starter clutch bolt with the washer.
• Hold the starter clutch with special tool and tighten its bolt to
the specified torque.
ir'&5ti
09920-34830: Starter
clutch
holder
~
Starter
clutch
bolt: 55 N·m (5.5 kgf-m, 40.0 Ib-ft)
STARTER
IDLE
GEAR
• Install the starter idle gear NO.2
CD,
its shaft
(2)
and the con-
caved washer
Q).
• Apply SUZUKI BOND lightly to the mating surfaces ® at the
parting line between the upper and lower crankcases and sur-
face
@ as shown.
~99104-31140:
SUZUKI BOND "1207B" (USA)
99000-31140: SUZUKI BOND "1207B" (Others)
• Install the new gasket @ and the dowel pins @.
I
CAUTION
I
I Use a new gasket
to
prevent
oil
leakage.