Filter
Top Products
3-42
ENGINE
• Install the tappet shims and the tappets to their original posi-
tion.
NOTE:
* Apply engine oil to the shim
and
tappet before fitting them.
* When seating the tappet shim, be sure the figure printed sur-
face faces the tappet.
INTAKE PIPE
• Remove the intake pipe.
• Install the intake pipe in the following procedure.
• Apply SUZUKI SUPER GREASE to the a-rings.
• Apply THREAD LOCK
to the screw and install the intake
pipes.
~
99000-32050: THREAD
LOCK
"1342"
• Make sure that the "UP" mark ® face upward.
WATER BYPASS UNION
• Remove the water bypass union.
• Apply SUZUKI BOND to the thread part of the water bypass
union and tighten it to the specified torque.
•
12078]99104-31140:
SUZUKI BOND
"1207B"
(USA)
99000-31140: SUZUKI BOND
"1207B"
(Others)
~
Water
bypass
union:
14 N·m (1.4 kgf-m, 10.0 Ib-ft)