Filter
Top Products
• Remove the oil seal @.
• Remove the gearshift shaft bearing with the special tool.
jT'OOt,
09921-20240: Bearing remover set (15 mm)
Installation
• Install the bearings with the special tool.
j.;!oot,
09913-70210: Bearing installer set (15 mm)
NOTE:
The stamped mark side
of
the gearshift shaft bearing faces out-
side.
• Install the oil seal
CD.
• Install the gearshift cam with the bearing.
NOTE:
The stamped mark side
of
the gearshift cam bearing faces out-
side.
ENGINE
3·55