Filter
Top Products
9·4
ELECTRICAL
SYSTEM
USING THE MULTI CIRCUIT TESTER
• Properly use the multi circuit tester
c±l
and 8 probes.
Improper use can cause damage to the motorcycle and
tester.
• If the voltage and current values are not known, begin mea-
suring in the highest range.
• When measuring the resistance, make sure that no voltage is
applied. If voltage is applied, the tester will be damaged.
• After using the tester, be sure to turn the switch to the OFF
position.
ICAUTION I
Before using the multi circuit tester, read its instruc-
tion manual.