Filter
Top Products
• Remove the right handlebar switch lead wires from the guide.
• Remove the steering stem upper bracket by removing its
head nut.
NOTE:
It is
not
necessary to remove the ignition switch, only when
replacing the steering stem lower bracket
and
bearings.
(Ignition switch removal:
c=T9-31)
• Remove the brake hose clamp bolt.
• Remove the steering damper.
(c=Ta-23)
• Remove the steering stem lock-nut, washer and steering stem
nut with the special tools.
Irtot,
09940-14911: Steering stem nut wrench
09940-14960: Steering stem nut wrench socket
• Draw out the steering stem lower bracket.
NOTE:
Hold the steering stem lower bracket
by
hand
to prevent it from
falling.
• Remove the dust seal
W,
steering stem upper bearing inner
race
(2)
and bearing @.
CHASSIS
8·25