Filter
Top Products
4-60
FI
SYSTEM
DIAGNOSIS
SENSORS
CMP SENSOR INSPECTION
The camshaft position sensor is installed on the cylinder head
cover.
(c:::::r
4-26)
CMP SENSOR REMOVAL AND INSTALLATION
• Remove the CMP sensor. (c:::::r3-28)
• Install the CMP sensor in the reverse order of removal.
CKP SENSOR INSPECTION
The crankshaft position sensor is installed on the right side of
middle crankcase cover.
(c:::::r4-28)
CKP SENSOR REMOVAL AND INSTALLATION
• Remove the generator cover. (c:::::r3-23)
• Install the generator cover in the reverse order of removal.
lAP SENSOR INSPECTION
The intake air pressure sensor is installed at the front side of the
air cleaner case.
(c:::::r4-30)
lAP SENSOR REMOVAL AND INSTALLATION
• Lift and support the fuel tank with its prop stay.
(C:::::rS-S)
• Remove the lAP sensor from the air cleaner box.
• Install the lAP sensor in the reverse order of removal.
TP SENSOR INSPECTION
The throttle position sensor is installed at the right side of the
No.4 throttle body.
(c:::::r4-33)
TP SENSOR REMOVAL AND INSTALLATION
• Remove the TP sensor. (c:::::rS-17)
• Install the TP sensor in the reverse order of removal.
TPS ADJUSTMENT
• Adjust the TP sensor. (c:::::r4-18)