Filter
Top Products
8·58
CHASSIS
• Remove the dust seals and piston seals.
ICAUTION I
Do not reuse the dust seals and piston seals to pre-
vent fluid leakage.
CALIPER INSPECTION
BRAKE CALIPER
Inspect the brake caliper cylinder wall for nicks, scratches or
other damage.
BRAKE CALIPER PISTON
Inspect the brake caliper piston surface for any scratches or
other damage.
Clean and degrease the contact portions
® of pad and piston.
CALIPER REASSEMBLY AND REMOUNTING
Reassemble the caliper in the reverse order of removal and dis-
assembly. Pay attention to the following points:
• Clean the caliper bores and pistons with specified brake fluid,
especially the dust seal grooves and piston seal grooves.
eSpecification and Classification: DOT 4
ICAUTION I
* Clean the caliper components with fresh brake fluid
before reassembly. Never use cleaning solvent or
gasoline to clean them.
* Do
not
wipe the brake fluid
off
after cleaning the
components.
* When cleaning the components, use the specified
brake fluid. Never use different types of fluid or
cleaning solvent such as gasoline, kerosine or oth-
ers.
* Replace the piston seals and
dust
seals with new
ones when reassembly. Apply the brake fluid to both
seals when installing them.