Filter
Top Products
THROTTLE BODY DISASSEMBLY
• Disconnect the respective vacuum hoses from each throttle
body. (Except E-33)
• Disconnect the respective vacuum hoses
CD
and EVAP purge
hoses
(2)
from each throttle body. (For E-33)
• Remove the lead wire clamps.
• Disconnect the TP sensor coupler
@, STP sensor coupler @,
STVA motor lead wire coupler @ and fuel injector couplers @.
• Remove the fuel delivery pipe assembly (f) by removing its
mounting screws.
• Remove the fuel injectors.
FUEL
SYSTEM
AND
THROTILE
BODY
5-17
• Remove the TP sensor @ with the special tool.
IT'OOt.
09930-11950: Torx wrench
NOTE:
Prior to disassembly,
mark
the TP sensor's original position with
a
paint
or scribe for accurate reinstallation.
@