Filter
Top Products
PERIODIC
MAINTENANCE
2·31
CHASSIS BOLTS AND NUTS
Tighten
initially
at 1 000 km (600 miles, 1 month) and
every
6000
km
(4000
miles, 6
months)
thereafter.
Check that all chassis bolts and nuts are tightened to their specified torque. (Refer to page 2-32 for the loca-
tions of the following nuts and bolts on the motorcycle.)
Item
N·m
kgf-m Ib-ft
CD
Steering stem head nut 90
9.0 6.5
~
Steering stem lock-nut 80
8.0 58.0
@ Front fork upper clamp bolt
23 2.3
16.5
® Front fork lower clamp bolt
23 2.3
16.5
@ Front fork cap bolt
23
2.3 16.5
@ Front axle 100
10.0 72.5
(f) Front axle pinch bolt
23 2.3
16.5
@ Handlebar clamp bolt 23
2.3 16.5
® Front brake master cylinder mounting bolt
10 1.0 7.0
® Front brake caliper mounting bolt 39
3.9
28.0
(j])
Front brake caliper housing bolt 22
2.2 16.0
@ Brake hose union bolt (Front & Rear) 23
2.3 16.5
® Caliper air bleeder valve (Front & Rear) 8
0.8 6.0
@ Brake disc bolt (Front) 23
2.3 16.5
@ Brake disc bolt (Rear) 35
3.5
25.5
@ Rear brake caliper mounting bolt 25
2.5 18.0
® Rear brake caliper housing bolt
37
3.7 27.0
® Rear brake master cylinder mounting bolt
10 1.0
7.0
(@
Rear brake master cylinder rod lock nut 18
1.8 13.0
@ Front footrest bracket mounting bolt 23
2.3 16.5
@ Swingarm pivot nut 100
10.0 72.5
@ Swingarm pivot lock nut 90
9.0 65.0
@ Rear suspension height adjuster nut
115 11.5 83.0
® Rear shock absorber mounting bolt/nut
50
5.0 36.0
(Upper & Lower)
@ Rear cushion lever/rod mounting nut 78
7.8 56.5
@ Rear axle nut
100 10.0
72.5
@ Rear sprocket nut 60
6.0
43.5
® Steering damper bolt/nut
23 2.3
16.5