Filter
Top Products
VALVE AND VALVE SPRING REASSEMBLY
• Install the valve spring seats.
• Apply MOLYBDENUM OIL SOLUTION to each oil seal
CD,
and press-fit them into position.
lIr MOLYBDENUM OIL SOLUTION
ICAUTION I
I Do
not
reuse the removed oil seals.
• Insert the valves, with their stems coated with MOLYBDE-
NUM OIL SOLUTION all around and along the full stem
length without any break.
ICAUTION I
When inserting each valve, take care not to damage
the
lip
of
the
oil seal.
lIr MOLYBDENUM OIL SOLUTION
• Install the valve springs with the small-pitch portion
® facing
cylinder head.
@: Large-pitch portion
• Put on the valve spring retainer
CD,
and using the valve lifter,
press down the springs, fit the cotter halves to the stem end,
and release the lifter to allow the cotter
C2l
to wedge in
between retainer and stem. Be sure that the rounded lip
® of
the cotter fits snugly into the groove
@ in the stem end.
IKiOti
09916-14510: Valve lifter
09916-14910: Valve lifter attachment
09916-84511 : Tweezers
ICAUTION I
Be sure to restore each
spring
and valve to
their
origi-
nal positions.
ENGINE
3-41
1
~Paint
UPWARD
@
t
t
1
®
r
~