Filter
Top Products
3·90
ENGINE
NOTE:
Hook the return spring end to the stopper@.
• Check the gearshift cam stopper moves smoothly.
• Rocate the gearshift cam in the neutral position.
• Install the gearshift cam stopper plate after aligning the gear-
shift cam pin
® with the gearshift cam stopper plate hole ®.
• Apply a small quantity of THREAD LOCK to the gearshift cam
stopper plate bolt and tighten it to the specified torque.
~
99000-32050: THREAD
LOCK
"1342"
~
Gearshift cam
stopper
plate bolt: 13 N·m
(1.3 kgf-m, 9.5 Ib-ft)
I