Filter
Top Products
THROTTLE POSITION SENSOR (TPS) SETTING
After all adjustments are completed, check or adjust the TPS
setting condition.
(Refer to page 4-18 for TPS setting procedure.)
THROTTLE
CABLE
ADJUSTMENT
NOTE:
Minor adjustment can be made by the throttle grip side adjuster.
(c:::::r
2- 17)
MAJOR ADJUSTMENT
• Loosen the lock-nuts
CD
of the throttle returning cable
~.
• Turn the returning cable adjuster @ to obtain proper cable
play.
• Loosen the lock-nuts
@ of the throttle pulling cable @.
• Turn the pulling cable adjuster @ in or out until the throttle
cable play
® should be 2.0 - 4.0 mm (0.08 - 0.16 in) at the
throttle grip.
• Tighten the lock-nuts
@ securely while holding the adjuster
@.
• While holding the throttle grip at the fully closed position,
slowly turn the returning cable adjuster
@ to obtain a cable
slack
@ of 1.0 mm (0.04 in).
• Tighten the lock-nuts
CD
securely.
FUEL
SYSTEM
AND
THROTTLE
BODY
5-29