Filter
Top Products
• When remounting the brake master cylinder onto the handle-
bar, align the master cylinder holders mating surface with
punched mark
® on the handlebar and tighten the upper
clamp bolt first as shown.
~
Front brake master cylinder mounting bolt: 10 N·m
(1.0 kgf-m, 7.0 Ib-ft)
• Tighten the union bolt. (Brake hose routing:
CT1
0-20)
~
Brake hose union bolt: 23 N·m (2.3 kgf.m, 16.5Ib-ft)
• Bleed air from the brake system.
(CT2-27)
INSPECTION AFTER REASSEMBLY
• Front brake
(CT2-25)
CHASSIS
8-63