Filter
Top Products
6·6
EXHAUST
SYSTEM
• Check the EXCVA to adjustment position. (c:::?6-4)
I
CAUTION
I
Do
not
use
the
adjustable
wrench
to
turn
EXCVA pul-
ley so as
not
to
cause damage to
the
internal gear of
EXCVA.
• Install the pulley @ to the shaft @.
NOTE:
Make sure that the shaft's line @ and cable slots © facing
upward
as shown.
• Hold the pulley with an adjustable wrench, and then tighten
the pulley mounting bolt to the specified torque.
~
EXCVA
pulley
mounting
bolt:
5 N·m (0.5 kgf-m, 3.5 Ib-ft)
ICAUTION!
When
loosening
or
tightening
the
pulley
bolt, be sure
to
fix
the
pulley
with
an
adjustable
wrench,
or
EXCVA
may
get
damaged.
• Tighten the EXCVA mounting bolt to the specified torque.
~
EXCVA
mounting
bolt: 10 N·m (1.0 kgf-m, 7.0 Ib-ft)
!
CAUTION
I
The cable
slots
of EXCVA
pulley
must
be located
upward
(adjustment
position). (c:::?6-4)
EXCVA INSPECTION
c:::?4-54
EXCV CABLE REPLACEMENT
• Disconnect the EXCV cables from the EXCVA pulley.
(c:::?6-5)
• Disconnect the EXCV cables from the EXCV pulley. (c:::?6-12)