Filter
Top Products
8-48
CHASSIS
• Remove the swingarm pivot boss by removing its set screws.
• Set the swingarm pivot boss by its set screws.
• Tighten the swingarm boss nut to the specified torque.
~
Swingarm pivot boss nut: 65 N·m (6.5 kgf-m, 47.0 Ib-ft)
INSPECTION AND DISASSEMBLY
SPACER
• Remove the spacers from swingarm.
• Remove the spacers from the cushion lever.
• Inspect the spacers for any flaws or other damage. If any
defects are found, replace the spacers with new ones.