Filter
Top Products
3·86
ENGINE
• Install the generator rotor onto the crankshaft.
• Install the rotor bolt with the washer.
• Hold the generator rotor with the special tool and tighten its
bolt to the specified torque.
,rodt,
09930-44520:
Rotor
holder
~
Generator
rotor
bolt: 120 N·m (12.0 kgf-m, 88.5 Ib-ft)
GENERATOR COVER
• Apply SUZUKI BOND lightly to the mating surfaces at the
parting line between the upper and lower crankcases as
shown.
•
1207~
99104-31140: SUZUKI BOND
"1207B"
(USA)
99000-31140: SUZUKI BOND "1207B" (Others)
• Install the dowel pins
CD
and new gasket
(2).
ICAUTION I
Use the new gaskets to prevent
oil
leakage.
• Install the generator cover and tighten the generator cover
bolts to the specified torque.
~
Generator
cover
bolt: 10 N·m (1.0 kgf-m, 7.0 Ib-ft)
A.
WARNING
Be careful
not
to
pinch
the
finger
between
the
genera-
tor
cover
and the crankcase.
NOTE:
Fit the gasket washer to the bolts ®.
• Install the CKP sensor @.