Filter
Top Products
3·18
ENGINE
CLUTCH
• Remove the clutch cover.
• Hold the clutch housing with the special tool.
I
CAUTION
I
Do not damage the clutch plates by the special tool.
i-Mot,
09920-53740: Clutch sleeve hub holder
• Remove the clutch springs.
NOTE:
Loosen the clutch spring
set
bolts little
by
little
and
diagonally.
• Remove the pressure plate and clutch drive plates and driven
plates.
• Remove the spring washer
CD
and washer
(2).
• Remove the clutch push piece @, bearing @ and the thrust
washer@.
• Remove the clutch push rod ®.
NOTE:
If it is difficult to
pull
out
the
push
rod ®, use a magnetic
hand
or
a wire.