Filter
Top Products
ECT SENSOR INSPECTION
The engine coolant temperature sensor is installed at the cylin-
der head.
(c:::::r
4-36)
ECT SENSOR REMOVAL AND INSTALLATION
• Remove the ECT sensor. (c:::::r7-8)
• Install the ECT sensor in the reverse order of removal.
Pay attention to the following points:
~
EeT
sensor: 18 N·m (1.8 kgf-m, 13 Ib-ft)
IAT SENSOR INSPECTION
The intake air temperature sensor is installed on the right side of
the air cleaner box.
(c:::::r4-38)
IAT SENSOR REMOVAL AND INSTALLATION
• Lift and support the fuel tank with its prop stay. (c:::::rs-S)
• Remove the IAT sensor in the from the air cleaner box.
• Install the IAT sensor in the reverse order of removal.
Pay attention to the following points:
~
IAT sensor: 18 N·m (1.8 kgf-m,
13Ib-ft)
AP SENSOR INSPECTION
The AP sensor is located under the front seat. (c:::::r4-40)
AP SENSOR REMOVAL AND INSTALLATION
• Remove the AP sensor from the frame.
• Install the AP sensor in the reverse order of removal.
TO SENSOR INSPECTION
TO SENSOR REMOVAL AND INSTALLATION
The tip over sensor is located under the fuel tank. (c:::::r4-43)
• Lift and support the fuel tank with its prop stay.
(c:::::rS-S)
• Remove the TO sensor from the battery case.
• Install the TO sensor in the reverse order of removal.
NOTE:
When installing the TO sensor, the arrow mark
® must be
pointed upward.
FI
SYSTEM
DIAGNOSIS
4-61