Filter
Top Products
9·12
ELECTRICAL
SYSTEM
Step 4
1) Check the starter relay. (c:::7'9-14)
Is the starter relay OK?
YES
NO
Poor contact of the starter relay.
Faulty starter relay.
Starter motor runs but does not crank the engine
Step 1
1) The starter motor runs when the transmission is in neutral, but does not run when the transmission is in
any position other than neutral, with the side-stand up.
2) Check the side-stand switch. (c:::7'9-15)
Is the side-stand switch OK?
YES
NO
Go to Step 2.
Faulty side-stand switch.
Step 2
1) Check the starter clutch.
Is the starter clutch OK?
YES Faulty starter clutch.
NO
• Open circuit in wire harness.
•
Poor contact of connector.
STARTER MOTOR REMOVAL AND DISAS-
SEMBLY
• Remove the starter motor.
• Disassemble the starter motor as shown in the illustration.
~
3
Nrn
(0.3 kgf-m, 2.0 Ib-ft)
i
rJi
@
/1
/'
I
CD
O-ring
~
Housing end (inside)
@ Starter motor case
® Armature
@ Housing end (outside)