Filter
Top Products
8·60
CHASSIS
BRAKE DISC INSPECTION
Visually check the brake disc for damage or cracks.
Measure the thickness with a micrometer.
Replace the disc if the thickness is less than the service limit or if
damage is found.
_ Front
disc
thickness: Service Limit: 5.0 mm (0.197 in)
j@t. 09900-20205: Micrometer (0 - 25 mm)
• Remove the brake calipers. (c:::::ra-57)
Measure the runout with a dial gauge.
Replace the disc if the runout exceeds the service limit.
_ Front
disc
runout: Service Limit: 0.30 mm (0.012 in)
j@t1 09900-20607: Dial gauge
(11100
mm)
09900-20701: Magnetic stand
* Brake
disc
removal
(c:::::rS-S)
* Brake
disc
installation
(c:::::rS-11)