Filter
Top Products
3-58
ENGINE
Installation
• Fit the new O-rings
CD
to each piston cooling oil jets as shown
and apply engine oil to them.
[CAUTION I
Use the new O-rings to prevent oil pressure leak.
NOTE:
Be sure the oil holes ® on each piston cooling oil
jet
faces the
top when installing them.
• Install each piston cooling oil jet with the bolt.
NOTE:
Apply a small quantity
of
THREAD
LOCK
to the bolts
and
tighten
them to the specified torque.
~
99000-32050: THREAD LOCK "1342"
~
Piston cooling
oil
jet bolt: 10 N·m (1.0 kgf-m, 7.0 Ib-ft)
• Install the oil jet (for transmission).
• Install the oil jet
(2)
(for cam chain tension adjuster).