Filter
Top Products
4·18
FI
SYSTEM
DIAGNOSIS
TPS ADJUSTMENT
1.Adjust the engine rpm to 1 150 rpm. (c::::::r2-15)
2.Connect the special tool (Mode select switch) to the dealer
mode coupler at the wiring harness.
3.lf the throttle position sensor adjustment is necessary, loosen
the screws and turn the throttle position sensor and bring the
line to middle.
4.Then, tighten the screws to fix the throttle position sensor.
,mob
09930-11950: Torx wrench
09930-82720:
Mode
select switch
The LCD indicates 0.4 sec.ltime, and two times show the correct
position, where it is fixed.
seco
,~'cOD
'~cDn
,.,,,
u
~
Incorrect
~
Correct position
~
Incorrect