Filter
Top Products
6-4
EXHAUST
SYSTEM
Before removing the EXCVA, be sure to set the EXCVA
pulley to the adjustment position.
EXCVA(EXHAUST
CONTROL
VALVE
ACTUATOR)
AND
EXCV
(EXHAUST CONTROL VALVE)
EXCVA REMOVAL
• Turn the ignition switch OFF.
• Remove the front and rear seats.
• Remove the fuel tank. (c::::rS-S)
• Connect the special tool (Mode select switch) to the dealer
mode coupler.
(c::::r4-16)
• After turning the special tool's switch ON, turn the ignition
switch ON.
'TImt,
09930-82720: Mode select switch
• Check the cable slots ® of the EXCVA pulley face upward
(adjustment position) as shown.
• Turn the ignition switch OFF.
I
CAUTION
I
• Remove the EXCVA mounting bolts.
• Hold the EXCVA pulley with an adjustable wrench, and
loosen the pulley mounting bolt.
I
CAUTION
I
* When loosening or tightening the pulley bolt, be sure
to fix the pulley with an adjustable wrench, or EXCVA
may get damaged.
* Do not use the adjustable wrench to turn EXCVA pul-
ley so as not to cause damage to the internal gear of
EXCVA.