Filter
Top Products
EXHAUST
SYSTEM
6-7
NOTE:
The
EXCV
cables are identified by the plated chrome color
and
shape.
Black chrome plated adjuster:
NO.1
cable G)
Silver chrome plated adjuster:
NO.2
cable
~
• Connect the EXCV cables (No.1 and No.2) temporarily to the
EXCVA pulley,
• Check or adjust the clearance
® becomes the adjuster end
and EXCVA pulley to provide 3 mm (0.12 in) and more.
• Install the muffler joint pipe together with the muffler body.
(c:::::r6-13)
• Make the
NO.1
cable straight and turn the
NO.1
cable adjuster
® in or out until the inner cable length @ becomes 42 - 43
mm (1.65 - 1.69 in).
• After adjusting the inner cable length
@, tighten the lock-nut
@.
NO.1
cable adjuster: Black chrome plated
• Make the
NO.2
cable straight and turn in the cable adjuster @ fully.
• Loosen the lock-nuts
@ and turn the
NO.2
cable adjuster ({) in or out until the inner cable length ©
becomes 58 - 59 mm (2.28 - 2.32 in).
• After adjusting the inner cable length
©, tighten the lock-nuts @.