Filter
Top Products
TRANSMISSION
• Install the bearing pins
CD
and the C-ring
(2)
on the upper
crankcase.
• Install the countershaft assembly on the upper crankcase.
NOTE:
Align the C-ring with the groove on the bearing
and
the bearing
pin with the indent on the bearing.
• Install the driveshaft assembly on the upper crankcase.
NOTE:
Align the bearing ring with the groove on the crankcase
and
the
bearing pin with the indent on the bearing.
• Install the oil seal @.
• Turn the bearings to install the bearing dowel pins ® in the
respective positions.
• Install the O-rings.
• Install the dowel pins
@.
ENGINE
3-79