Filter
Top Products
8·50
CHASSIS
CUSHION LEVER AND CUSHION LEVER RODS
Inspect the cushion lever and cushion lever rods for damage.
SWINGARM PIVOT SHAFT
Using a dial gauge, check the pivot shaft runout and replace it if
the runout exceeds the limit.
_ Swingarm pivot shaft runout:
Service limit: 0.3 mm (0.01 in)
n13KI
09900-20607: Dial gauge (11100 mm, 10 mm)
09900-20701: Magnetic stand
09900-21304: V-block set (100 mm)
CHAIN BUFFER
Inspect the chain buffer for wear and damage.
If any defects are found, replace the chain buffer with a new
one.