Filter
Top Products
8·54
CHASSIS
SHOCK ABSORBER AND CUSHION LEVER MOUNTING NUT
• Install the washers ® and cushion lever. (c:::::rS-51)
• Tighten the cushion lever mounting nut
CD
to the specified
torque.
~
Cushion lever mounting nut: 78 N·m
(7.8 kgf-m, 56.5 Ib-ft)
• Assemble the cushion lever, cushion rod and rear shock
absorber. (c:::::rS-44)
~
Rear shock absorber mounting nut
~:
50 N·m (5.0 kgf-m, 36.0 Ib-ft)
Cushion rod nut @: 78 N·m (7.8 kgf-m, 56.5 Ib-ft)
• Route the brake hose and install the brake hose guides.
(c:::::r1
0-21)
• Remount the rear wheel. (c:::::rS-37)
• Remount the side-stand. (c:::::r10-26)
• Connect the drive chain. (c:::::rS-75)
• Tighten the brake hose union bolt to the specified torque.
(Brake fluid replacement: c:::::rS-65)
~
Brake hose union bolt: 23 N·m (2.3 kgf-m, 16.5 Ib-ft)
FINAL INSPECTION AND ADJUSTMENT
After installing the rear suspension and wheel, the following
adjustments are required before driving.
* Drive chain (c::::T2-22)
* Tire pressure (c::::T2-2S)