Filter
Top Products
,root.
09940-30221: Front
fork
assembling
tool
~
Damper rod bolt: 23 N·m (2.3 kgf-m, 16.5 Ib-ft)
ICAUTION I
Use a new damper rod
bolt
gasket
to
prevent
oil
leak-
age.
I
'Mb
CHASSIS
8·19
FORK OIL
• Place the front fork vertically without spring.
• Compress it fully.
• Pour specified front fork oil up to the top level of the outer
tube.
_ Capacity (each leg): 509 ml (17.2117.9 US/Imp oz)
E!J 99000-99044-L01: SUZUKI FORK OIL L01
or an equivalent
fork
oil
• Move the inner rod slowly with the special tool ten times and
more until no more bubbles come out from the oil.
,,;oot.
09940-50120: Inner rod
holder
NOTE:
Refill front fork oil up to the top
of
the outer tube so that bubbles
are visible while bleeding air.
• Refill specified front fork oil up to the top level of the outer
tube again. Move the outer tube up and down several strokes
until no more bubbles come out from the oil.
• Keep the front fork vertically and wait 5 - 6 minutes.
NOTE:
* Always keep oil level over the cartridge top end, or
air
may
enter the cartridge during this procedure.
* Take extreme care so as to pump out
air
completely.
'%011---
t
t
• Hold the front fork vertically and adjust fork oil level with the
special tool.
NOTE:
When adjusting the fork oil level, compress the outer tube fully
without the fork spring.
_
Fork
oil
level: 101 mm (3.98 in)
,';&1.09943-74111: Front
fork
oil
level gauge