Filter
Top Products
8·12
CHASSIS
SPACER NUT
With the flange of spacer nut
CD
contacting the left front fork leg,
tighten the two axle pinch bolts
(2)
on the left front fork leg to the
specified torque.
~
Front axle pinch bolt: 23 N·m (2.3 kgf-m, 16.5 Ib-ft)
WHEEL
Install the front wheel with the front axle and hand-tighten the
front axle temporarily.
A WARNING
The directional arrow on the tire should point to the
wheel rotation, when remounting the wheel.
BRAKE CALIPER
• Tighten the brake caliper mounting bolts to the specified
torque.
~
Front brake caliper mounting bolt: 39 N·m
(3.9 kgf-m, 28.0 Ib-ft)
FRONT AXLE
• Tighten the front axle to the specified torque.
~
Front axle: 100 N·m (10.0 kgf-m, 72.5 Ib-ft)
NOTE:
Before tightening the two axle pinch bolts on the right front fork
leg, move the front fork up
and
down 4 or 5 times.
• Tighten two axle pinch bolts on the right front fork leg to the
specified torque.
~
Front axle pinch bolt: 23 N·m (2.3 kgf-m, 16.5 Ib-ft)